How to make cards for mother’s day

How to make cards for mother’s day: If you do not know what to give on Mother’s Day – with their hands to make a postcard. Postcards – a great way to greet a loved one, but she also created his own – is doubly nice.

You will need:

a sheet of white paper;
colored cardboard;
glue;
decorative patterned paper or a piece of wallpaper;
pencil;
stationery knife;
colored paper.
Now you need to do the following.

Draw a pattern petals of daisies. Then transfer it to paper and cut from white paper about 32 and two slices to the core.
Petals slightly bend in the middle and use the pencil to tighten the outside edge. Then half of them stick in a circle one heart and a half to the other. So you should get two daisies.

Two flowers glue together and then stick to the center of the upper circle cut out of yellow paper. Sheet cardboard yellow bend in half. Draw on any paper flower shape resembling a daisy.
Carefully cut it so as not to damage the sheet. Now attach the cardboard template on the side that you marked face and move it to the center of the picture. Now carefully cut flower.

On paper or wallpaper with a pattern cut rectangle is sized postcards page, and then stick it inside (if you have a color printer, you can print a picture template located below).

With green paper cut several thin strips using scissors and slightly curled them. Glue the strips in the top right cards right, then attach them at the chamomile. Draw and then cut a divine cow and stick it on the plate.

Thank you for your attention!

courtesy: vidpoviday

How to make Easy Handmade DIY Suncatcher

Surprise your loved one with this special suncatcher. Made with glass colours and fabric paining this indeed is a lovely DIY, something they will cherish forever.

Take an A4 white paper; draw a simple flower on it.
Place an OHP sheet on the drawing and outline the flower design using 3 D Cone Outliner Non Sticky White 707. Let it dry.
Make about 5 such flowers.
Paint the flowers in shading effect using Water Based Glass Colours Pink 856 and Ultramarine Blue 859. Leave it to dry.
Cut along the outlines of the flowers.
Make sure to keep one small sized OHP strip attached to the petal further for punching the hole.

Take some A4 size poplin fabric. Place the embroidery ring on it and mark the inner outline of the ring on it.
Write “you are my sunshine” inside the circle with a pencil

Paint the words “You are my sunshine” with Soft Acrylic Colours Pink 218 and Soft Acrylic Colours Pearl Lilac 507. Let it dry.

Similarly paint the background of the words with water shading technique using Soft Acrylic Colours Pink 218 and Violet 225.
Let it dry.
Paint the embroidery ring with Acrylic Colours Pink 18. Let it dry.

Cut and remove the excess fabric around the words with the pair of scissors.
Attach the circular painted piece of fabric to the ring using needle and thread and white pearls.
Your ring will now look like this.

Take the painted flowers and punch the hole on the OHP strip neatly.
Make the strings using pink plastic beads, pearls, pink thread and the flowers towards the end of each string securing it with small knots on regular intervals.
Attach the bead and flower strings to the ring aesthetically. Refer to the image.

How to make Desk organizer from newspaper tube

Here is a personal organizer make for yourself

And this for her daughter

I hope that now my lynx tips will be more comfortable than in the jars.

For its organizer I obpletala glass jar from a salt of the cardboard rolls of toilet paper and a jar of losyona.
H photo below shows how I ended up netting (suddenly someone will be interested)

How to make Newspaper roll:

It wanted to make 5 cups, but as it is not like the figure as a whole, then placed the cups because the figure turned and between hole – 5th cup :)))
Form stands loomed yaytsepodobnaya.

First, weaving an oval, but more than the rounder it worked.

Stackable oval tubes from 1/3 strips for tubes.
Pasted 2-3 small ducts and obpletala long.

Well, our stand is the same with a picture.

Toning stain.

Spiral lines on the cups slightly clobbered acrylic gold with a brush and stand and small details paint completely.

Glue one by one our tsylindry

Done.

courtesy: anngol

Beautiful Small Paper Flowers – Step by step (Tutorial)

I want to share with you the stages of the manufacture of fine paper flowers. We will make three kinds of colors: Small tulips, white flowers, and simple small flowers. In this photo – white flowers and tulips.

For work, we need materials and tools: Punches “Flower”, ink pads, paper for watercolor, PVA glue, waxed cord, all, DOTS (a device with a ball on the end of the embossing), felt-tip pen with ribbed cap (pictured pink), rubber mat batik, water tank, stamens (not pictured).

The first flower that we do – tulip.

  • Using a hole punch to make blank colors of watercolor paper.
  • Ink pads and touch up the edge of the middle of a flower.
  • Moisten with water harvesting.
  • Put flowers on a piece of gauze to soak up excess moisture.

  • The wet preform flower put on a rubber mat and a tool for stamping to shape the petals, performing with the pressure from the edges of the petals to the center. The result will be is such a blank.
  • All to make a hole in the center.
  • To take the stem waxed cord. At the end of the cord to make a knot.
  • Cut the stems, tying the knot.

  • Next, put a flower on blank Schnur- stalk.
  • The knot on the end of string dipped in PVA glue.
  • Begins to form a cup of a tulip: raise to the center opposite the petals and fasten them to the node with the adhesive.
  • A slightly different angle.
  • Add the paste to the other petals and fix.
  • Tulip is ready. Admiring the finished result.

  • Next flower – white, it reminds me of apple flowers. Use the hole punch of watercolor paper to make harvesting flowers.
  • Inkpad pink paint over the edge of colors.
  • Moisten the flowers and put on the gauze, in order to absorb excess water.
  • The wet preform placed on the rubber mat. Ribbed cap pen makes the petals form. From the edge of the petal to hold pen cap with the push towards the center.
  • Cap the marker placed in the center of the flower and lightly press to pitch lifted.
  • The resulting preform should dry (not wet).
  • Flower consists of two pieces. Petals flower top blanks have to look up. In the center make a hole with an awl.

  • Then collect Flower. Stamens inserted into the hole, first dress up the blank with the petals, then – down the petals.
  • We fix the petals together with white glue.
  • The flower is ready. We admire the result.
  • And the latest we will do here such small flowers. We will need to punch and stamens.

  • Punchers (I diameter of 1cm flower.) To make a harvesting flower.
  • Inkpad stained edges of petals.
  • Moisturizing workpiece.
  • Spread on batik.

  • The wet preform flower embossed on the rubber mat, holding with pressure from the edge of the petal to the center.
  • Overturn the workpiece. Embossing tool to press in the center of the flower, the petals lifted.
  • The result here are the flowers.
  • We will use the stamen of the flower to midway.
  • All to make a hole in the center.

Stamens fluff glue and put a flower.

Flowers ready.

These are not complicated colors are obtained as a result, they can be used in postcards, crafts for decoration, etc.

Hope you like this beautiful small paper flowers.