How to make volumetric digit of 4 for the birthday

This beautiful tutorial shows how you can make the number 4 for your child’s birthday by yourself.

To do this, you do not need to have special skills and skills, you only need a desire, a great mood, the necessary materials and 18-20 hours of free time 🙂

 

To make a figure, we need:

  • cardboard;
  • pencil;
  • ruler;
  • Painting tape;
  • hot glue;
  • scissors;
  • stationery knife;
  • small rope;
  • wooden brusochki;
  • 3 rolls of corrugated paper (I have Italian, with a density of 180 g, 558 tons).

To begin with, we will make the skeleton of our figure 🙂 The photo below shows all the dimensions. I have a template on the most common cardboard. The very same figure I make of three-layer cardboard of high quality (since I lease them and need them to serve as long as possible). But the usual cardboard box will do 🙂

We cut out 2 such blanks (the front and the underside side) and the sides 10 cm thick.

Before you start to collect the skeleton of a figure, on 1 piece from the workpieces we make holes with an awl or a small screwdriver and pull out a small rope, which then will serve as a handle! With the handle is very convenient. You can freely transfer the finished digit without crushing the pound. And even during a photo shoot, you can hang it on the wall 🙂

We collect the skeleton with the help of paint tape. Joints from the inside must be smeared with hot glue!

Then we glue brusochki, we weight a tail and a back of our four. In this respect, figure 4 is the most difficult in manufacturing, since it is necessary that it stably stands on one leg and does not fall over the nose. For weighting, you can also use racks or marlbs, or maybe you’ll come up with something else 🙂

Not all master classes write about hot glue, many are limited to paint tape. However, I strongly advise from all sides, in all the cracks to fill the glue, to press down all the joints – it will stay firmly 🙂

The base will be glued at the very last moment, when the figure will be almost completely zadekorirovana.

It’s a view from the wrong side. Without a reason, the nose is still falling.

Next, I will decorate the joints. To do this, cut out a strip of paper 2 cm thick and stretch it properly.

Glue on hot glue 🙂

It is also necessary to glue the inside of the figure with paper. And that’s what we got 🙂

When the frame is ready – we begin to prepare the balls. Take the paper, cut it into strips 5 cm wide. Pretty stretch them and cut them into squares of 5 x 5 cm.

We will glue the technique in the technique. Surely everyone already knows what and how. But just in case, I’ll show 🙂
Take a pencil and wrap around it our box, like this.

The result is a pound 🙂 Apply to the tip of a drop of hot glue and glue it to the figure.

Almost the entire figure we pasted with poundies 5 x 5 cm. A bottom and left bottom side with 4 × 4 cm pound.

When the figure is almost ready, glue the base on the hot glue! The photo shows how I weighted him.

We glue the leg of the figure with the pound. And decorate the back of the figure. I just pasted paper.

And another such moment, 2 marbles is not accidental. The finished figure continued to fall treacherously to the nose. The conclusion is that it is necessary to weight the back better and take heavier bars / slats. By 4 there are almost no master classes, so I had to do it by trial and error. So, these two pebbles cool me out: 🙂 I glued them to the hot glue and voila, the figure took a steady vertical position.

I hope that my master class will be useful to you. Try it, experiment it and you will succeed!

Immediately I apologize if something is poorly explained. It’s pretty hard to convey all the moments in the photo, maybe something missed. There will be questions – ask, I’ll be happy to answer 🙂

source

#Create#Volumetric #Digit #Birthday #Art #Craft #StepByStep

Beautiful Small Paper Flowers – Step by step (Tutorial)

I want to share with you the stages of the manufacture of fine paper flowers. We will make three kinds of colors: Small tulips, white flowers, and simple small flowers. In this photo – white flowers and tulips.

For work, we need materials and tools: Punches “Flower”, ink pads, paper for watercolor, PVA glue, waxed cord, all, DOTS (a device with a ball on the end of the embossing), felt-tip pen with ribbed cap (pictured pink), rubber mat batik, water tank, stamens (not pictured).

The first flower that we do – tulip.

  • Using a hole punch to make blank colors of watercolor paper.
  • Ink pads and touch up the edge of the middle of a flower.
  • Moisten with water harvesting.
  • Put flowers on a piece of gauze to soak up excess moisture.

  • The wet preform flower put on a rubber mat and a tool for stamping to shape the petals, performing with the pressure from the edges of the petals to the center. The result will be is such a blank.
  • All to make a hole in the center.
  • To take the stem waxed cord. At the end of the cord to make a knot.
  • Cut the stems, tying the knot.

  • Next, put a flower on blank Schnur- stalk.
  • The knot on the end of string dipped in PVA glue.
  • Begins to form a cup of a tulip: raise to the center opposite the petals and fasten them to the node with the adhesive.
  • A slightly different angle.
  • Add the paste to the other petals and fix.
  • Tulip is ready. Admiring the finished result.

  • Next flower – white, it reminds me of apple flowers. Use the hole punch of watercolor paper to make harvesting flowers.
  • Inkpad pink paint over the edge of colors.
  • Moisten the flowers and put on the gauze, in order to absorb excess water.
  • The wet preform placed on the rubber mat. Ribbed cap pen makes the petals form. From the edge of the petal to hold pen cap with the push towards the center.
  • Cap the marker placed in the center of the flower and lightly press to pitch lifted.
  • The resulting preform should dry (not wet).
  • Flower consists of two pieces. Petals flower top blanks have to look up. In the center make a hole with an awl.

  • Then collect Flower. Stamens inserted into the hole, first dress up the blank with the petals, then – down the petals.
  • We fix the petals together with white glue.
  • The flower is ready. We admire the result.
  • And the latest we will do here such small flowers. We will need to punch and stamens.

  • Punchers (I diameter of 1cm flower.) To make a harvesting flower.
  • Inkpad stained edges of petals.
  • Moisturizing workpiece.
  • Spread on batik.

  • The wet preform flower embossed on the rubber mat, holding with pressure from the edge of the petal to the center.
  • Overturn the workpiece. Embossing tool to press in the center of the flower, the petals lifted.
  • The result here are the flowers.
  • We will use the stamen of the flower to midway.
  • All to make a hole in the center.

Stamens fluff glue and put a flower.

Flowers ready.

These are not complicated colors are obtained as a result, they can be used in postcards, crafts for decoration, etc.

Hope you like this beautiful small paper flowers.

20+ Sparkling Christmas Tree Decorating Ideas – How to Decorate a Christmas Tree

Is it accurate to say that you are as yet deferring putting the Christmas tree up for quite a while? Perhaps that is on account of you’ve came up short on new finishing thoughts. It gets kinda exhausting setting it up a similar way every year so let us demonstrate to you a cluster of wonderful Christmas tree designing thoughts that you will positively adore.

This year, leave the Christmas presents under a shimmering, special Christmas tree that will influence you to stop and venerate it for a couple of minutes each time you go beside it. There’s something else entirely to finishing a Christmas tree than simply setting up a container brimming with Christmas adornments and wrapping a Christmas festoon around it.

Best Collection of 20+ Sparkling Christmas Tree Decorating Ideas You’ll Lose Yourself In. Investigate the accompanying pictures and you’ll perceive how a basic game plan of hues, shapes and materials can offer setting to your Christmas tree stylistic layout.

Hope you like these sparkling Christmas Tree Decorating Ideas.

Pista Sell Bird for Wall decoration Craft Ideas

We usually always have a bowl of pistachio nuts on our coffee table. As we were eating them one evening and tossing the shells into another bowl – I started thinking there must be something I can do with these – so I started collecting them in a large zip lock bag. I did a search for What to do with pistachio shells and the list of items that came up surprised me. One was to ground the shells and make soap – that just looked like it would hurt – so passed on that one. I saw a cool picture of wall decoration made from the shells and I definitely wanted to make that. I figured my first try would probably be a learning experience and end up as decoration so I decided to paint the shells.

Hope you like these Pista Sell Bird for Wall decoration Ideas.

Image source: pinterest.com