DIY Casket of a scotch reel:
- double sided tape
- bias binding
- thin plastic
- foam pipe system store (approximate price – 20rub.)
- masking tape
- yarn and hosiery needles or sleeve of the old but beautiful sweater)))
- needle and thread
To take first reel of adhesive tape or any other container suitable for round boxes. Need to be covered with strips of double-sided tape on the inside edge and the outside of the bobbin on the opposite side.
Strip of fabric glue on one side butt to the edge, on the other hand incision the edge of the fabric and fold like the picture (can be on top of the usual fix tape). Inside the end of the strip of fabric to wrap and glue a strip of double-sided tape on.
Melt glue one edge of the bias binding as in the picture. Gently fold the end and glue. Unscrew Bakey, smooth edge and glue in a few places.
Cut a piece of fabric, cardboard to make “sun.” Fabric pull on the bobbin and paste Melt edge in several places.
Further below we add “sun” and glue it “rays” to the reel.
Purchased in advance in the system store the foam pipe cut along, we need a third of its width. Try on a bobbin and cut the excess.
Remove the foam rubber ring, a piece of cloth covering the bottom of the board, and fasten the edges Melt put on the ring. Now you can go relax on the couch and tie stockings
Associated stocking try on a bobbin, closing the loop and fasten (Thermo) to the bottom of the box, and then on top. (For stocking I gained 100 loops and knitted elastic band 1×1.)
Cap. Cut a circle of cardboard or thin plastic (plain folder) by the diameter of the spool, for a pattern, I took another reel. From a piece of the same fabric cut out a circle is gathered on the edge and pulled thread.
Getting to the decor.
petals cut out of felt in two sizes. The edges of each petal Melt glue. Sticking two rows to the bottom – a circle of felt (smaller than about 1.5 cm cap diameter).
Collect flower and do the middle of a – a circle cut curved scissors.
Decorate with beads. Each sewn to the petals and then all glued to the flower.
The lid is secured to the box in the same piece of felt and then fasten the flower.
And here are a few ideas I propose to look caskets.
Hope you like this yarn bag tutorial.
We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!
Thank you for visiting our website. Keep Creating with Art & Craft!