Different types of Kurtis patterns

Kurtis has become a very integral outfit it Indian fashion industry. From parties to casual wear for your work every day, Kurtis has become a big fashion statement. The ease of collaborating bright hues with a salwar or churidars or even a pair of jeans or palazzos, Kurtis have become handy.

Hope you like these Kurtis patterns designs.

How to make cards for mother’s day

How to make cards for mother’s day: If you do not know what to give on Mother’s Day – with their hands to make a postcard. Postcards – a great way to greet a loved one, but she also created his own – is doubly nice.

You will need:

a sheet of white paper;
colored cardboard;
glue;
decorative patterned paper or a piece of wallpaper;
pencil;
stationery knife;
colored paper.
Now you need to do the following.

Draw a pattern petals of daisies. Then transfer it to paper and cut from white paper about 32 and two slices to the core.
Petals slightly bend in the middle and use the pencil to tighten the outside edge. Then half of them stick in a circle one heart and a half to the other. So you should get two daisies.

Two flowers glue together and then stick to the center of the upper circle cut out of yellow paper. Sheet cardboard yellow bend in half. Draw on any paper flower shape resembling a daisy.
Carefully cut it so as not to damage the sheet. Now attach the cardboard template on the side that you marked face and move it to the center of the picture. Now carefully cut flower.

On paper or wallpaper with a pattern cut rectangle is sized postcards page, and then stick it inside (if you have a color printer, you can print a picture template located below).

With green paper cut several thin strips using scissors and slightly curled them. Glue the strips in the top right cards right, then attach them at the chamomile. Draw and then cut a divine cow and stick it on the plate.

Thank you for your attention!

courtesy: vidpoviday

How to make Easy Handmade DIY Suncatcher

Surprise your loved one with this special suncatcher. Made with glass colours and fabric paining this indeed is a lovely DIY, something they will cherish forever.

Take an A4 white paper; draw a simple flower on it.
Place an OHP sheet on the drawing and outline the flower design using 3 D Cone Outliner Non Sticky White 707. Let it dry.
Make about 5 such flowers.
Paint the flowers in shading effect using Water Based Glass Colours Pink 856 and Ultramarine Blue 859. Leave it to dry.
Cut along the outlines of the flowers.
Make sure to keep one small sized OHP strip attached to the petal further for punching the hole.

Take some A4 size poplin fabric. Place the embroidery ring on it and mark the inner outline of the ring on it.
Write “you are my sunshine” inside the circle with a pencil

Paint the words “You are my sunshine” with Soft Acrylic Colours Pink 218 and Soft Acrylic Colours Pearl Lilac 507. Let it dry.

Similarly paint the background of the words with water shading technique using Soft Acrylic Colours Pink 218 and Violet 225.
Let it dry.
Paint the embroidery ring with Acrylic Colours Pink 18. Let it dry.

Cut and remove the excess fabric around the words with the pair of scissors.
Attach the circular painted piece of fabric to the ring using needle and thread and white pearls.
Your ring will now look like this.

Take the painted flowers and punch the hole on the OHP strip neatly.
Make the strings using pink plastic beads, pearls, pink thread and the flowers towards the end of each string securing it with small knots on regular intervals.
Attach the bead and flower strings to the ring aesthetically. Refer to the image.

How to make Desk organizer from newspaper tube

Here is a personal organizer make for yourself

And this for her daughter

I hope that now my lynx tips will be more comfortable than in the jars.

For its organizer I obpletala glass jar from a salt of the cardboard rolls of toilet paper and a jar of losyona.
H photo below shows how I ended up netting (suddenly someone will be interested)

How to make Newspaper roll:

It wanted to make 5 cups, but as it is not like the figure as a whole, then placed the cups because the figure turned and between hole – 5th cup :)))
Form stands loomed yaytsepodobnaya.

First, weaving an oval, but more than the rounder it worked.

Stackable oval tubes from 1/3 strips for tubes.
Pasted 2-3 small ducts and obpletala long.

Well, our stand is the same with a picture.

Toning stain.

Spiral lines on the cups slightly clobbered acrylic gold with a brush and stand and small details paint completely.

Glue one by one our tsylindry

Done.

courtesy: anngol

How to make volumetric digit of 4 for the birthday

This beautiful tutorial shows how you can make the number 4 for your child’s birthday by yourself.

To do this, you do not need to have special skills and skills, you only need a desire, a great mood, the necessary materials and 18-20 hours of free time 🙂

 

To make a figure, we need:

  • cardboard;
  • pencil;
  • ruler;
  • Painting tape;
  • hot glue;
  • scissors;
  • stationery knife;
  • small rope;
  • wooden brusochki;
  • 3 rolls of corrugated paper (I have Italian, with a density of 180 g, 558 tons).

To begin with, we will make the skeleton of our figure 🙂 The photo below shows all the dimensions. I have a template on the most common cardboard. The very same figure I make of three-layer cardboard of high quality (since I lease them and need them to serve as long as possible). But the usual cardboard box will do 🙂

We cut out 2 such blanks (the front and the underside side) and the sides 10 cm thick.

Before you start to collect the skeleton of a figure, on 1 piece from the workpieces we make holes with an awl or a small screwdriver and pull out a small rope, which then will serve as a handle! With the handle is very convenient. You can freely transfer the finished digit without crushing the pound. And even during a photo shoot, you can hang it on the wall 🙂

We collect the skeleton with the help of paint tape. Joints from the inside must be smeared with hot glue!

Then we glue brusochki, we weight a tail and a back of our four. In this respect, figure 4 is the most difficult in manufacturing, since it is necessary that it stably stands on one leg and does not fall over the nose. For weighting, you can also use racks or marlbs, or maybe you’ll come up with something else 🙂

Not all master classes write about hot glue, many are limited to paint tape. However, I strongly advise from all sides, in all the cracks to fill the glue, to press down all the joints – it will stay firmly 🙂

The base will be glued at the very last moment, when the figure will be almost completely zadekorirovana.

It’s a view from the wrong side. Without a reason, the nose is still falling.

Next, I will decorate the joints. To do this, cut out a strip of paper 2 cm thick and stretch it properly.

Glue on hot glue 🙂

It is also necessary to glue the inside of the figure with paper. And that’s what we got 🙂

When the frame is ready – we begin to prepare the balls. Take the paper, cut it into strips 5 cm wide. Pretty stretch them and cut them into squares of 5 x 5 cm.

We will glue the technique in the technique. Surely everyone already knows what and how. But just in case, I’ll show 🙂
Take a pencil and wrap around it our box, like this.

The result is a pound 🙂 Apply to the tip of a drop of hot glue and glue it to the figure.

Almost the entire figure we pasted with poundies 5 x 5 cm. A bottom and left bottom side with 4 × 4 cm pound.

When the figure is almost ready, glue the base on the hot glue! The photo shows how I weighted him.

We glue the leg of the figure with the pound. And decorate the back of the figure. I just pasted paper.

And another such moment, 2 marbles is not accidental. The finished figure continued to fall treacherously to the nose. The conclusion is that it is necessary to weight the back better and take heavier bars / slats. By 4 there are almost no master classes, so I had to do it by trial and error. So, these two pebbles cool me out: 🙂 I glued them to the hot glue and voila, the figure took a steady vertical position.

I hope that my master class will be useful to you. Try it, experiment it and you will succeed!

Immediately I apologize if something is poorly explained. It’s pretty hard to convey all the moments in the photo, maybe something missed. There will be questions – ask, I’ll be happy to answer 🙂

source

#Create#Volumetric #Digit #Birthday #Art #Craft #StepByStep

How to make bullion rose for kurti neck

There are probably as many ways to make a bullion rose as there are people making them. I would like to include my take on the classic spiral bullion. These instructions are for big chunky roses as shown on the kurti.

Spiral Bullion Rose:
-work with three strands of floss and a # 7 milliners needle

-it is helpful to interface the area behind the embroidery

-use three colors of floss plus a green. Use a contrast for the center and two shades of pink or red (a light and a

-medium shade) for the spiral rose petals. Use the darker shade for the center fifteen wrap spiral bullions and

-the lighter shade for the outer twenty-two wrap spiral bullions.

-the spiral bullion is made in four sections (colors):

-center – one, five wrap bullion and two, ten wrap bullions

-inner petals – six, fifteen wrap spirals

-outer petals – eight, twenty-two wrap spirals

-leaf base – four, twenty-four wrap spirals